The Complete Guide to Direct Traffic in Google Analytics

Posted by tombennet

When it comes to direct traffic in Analytics, there are two deeply entrenched misconceptions.

The first is that it’s caused almost exclusively by users typing an address into their browser (or clicking on a bookmark). The second is that it’s a Bad Thing, not because it has any overt negative impact on your site’s performance, but rather because it’s somehow immune to further analysis. The prevailing attitude amongst digital marketers is that direct traffic is an unavoidable inconvenience; as a result, discussion of direct is typically limited to ways of attributing it to other channels, or side-stepping the issues associated with it.

In this article, we’ll be taking a fresh look at direct traffic in modern Google Analytics. As well as exploring the myriad ways in which referrer data can be lost, we’ll look at some tools and tactics you can start using immediately to reduce levels of direct traffic in your reports. Finally, we’ll discover how advanced analysis and segmentation can unlock the mysteries of direct traffic and shed light on what might actually be your most valuable users.

What is direct traffic?

In short, Google Analytics will report a traffic source of "direct" when it has no data on how the session arrived at your website, or when the referring source has been configured to be ignored. You can think of direct as GA’s fall-back option for when its processing logic has failed to attribute a session to a particular source.

To properly understand the causes and fixes for direct traffic, it’s important to understand exactly how GA processes traffic sources. The following flow-chart illustrates how sessions are bucketed — note that direct sits right at the end as a final "catch-all" group.

Broadly speaking, and disregarding user-configured overrides, GA’s processing follows this sequence of checks:

AdWords parameters > Campaign overrides > UTM campaign parameters > Referred by a search engine > Referred by another website > Previous campaign within timeout period > Direct

Note the penultimate processing step (previous campaign within timeout), which has a significant impact on the direct channel. Consider a user who discovers your site via organic search, then returns via direct a week later. Both sessions would be attributed to organic search. In fact, campaign data persists for up to six months by default. The key point here is that Google Analytics is already trying to minimize the impact of direct traffic for you.

What causes direct traffic?

Contrary to popular belief, there are actually many reasons why a session might be missing campaign and traffic source data. Here we will run through some of the most common.

1. Manual address entry and bookmarks

The classic direct-traffic scenario, this one is largely unavoidable. If a user types a URL into their browser’s address bar or clicks on a browser bookmark, that session will appear as direct traffic.

Simple as that.

2. HTTPS > HTTP

When a user follows a link on a secure (HTTPS) page to a non-secure (HTTP) page, no referrer data is passed, meaning the session appears as direct traffic instead of as a referral. Note that this is intended behavior. It’s part of how the secure protocol was designed, and it does not affect other scenarios: HTTP to HTTP, HTTPS to HTTPS, and even HTTP to HTTPS all pass referrer data.

So, if your referral traffic has tanked but direct has spiked, it could be that one of your major referrers has migrated to HTTPS. The inverse is also true: If you’ve migrated to HTTPS and are linking to HTTP websites, the traffic you’re driving to them will appear in their Analytics as direct.

If your referrers have moved to HTTPS and you’re stuck on HTTP, you really ought to consider migrating to HTTPS. Doing so (and updating your backlinks to point to HTTPS URLs) will bring back any referrer data which is being stripped from cross-protocol traffic. SSL certificates can now be obtained for free thanks to automated authorities like LetsEncrypt, but that’s not to say you should neglect to explore the potentially-significant SEO implications of site migrations. Remember, HTTPS and HTTP/2 are the future of the web.

If, on the other hand, you’ve already migrated to HTTPS and are concerned about your users appearing to partner websites as direct traffic, you can implement the meta referrer tag. Cyrus Shepard has written about this on Moz before, so I won’t delve into it now. Suffice to say, it’s a way of telling browsers to pass some referrer data to non-secure sites, and can be implemented as a <meta> element or HTTP header.

3. Missing or broken tracking code

Let’s say you’ve launched a new landing page template and forgotten to include the GA tracking code. Or, to use a scenario I’m encountering more and more frequently, imagine your GTM container is a horrible mess of poorly configured triggers, and your tracking code is simply failing to fire.

Users land on this page without tracking code. They click on a link to a deeper page which does have tracking code. From GA’s perspective, the first hit of the session is the second page visited, meaning that the referrer appears as your own website (i.e. a self-referral). If your domain is on the referral exclusion list (as per default configuration), the session is bucketed as direct. This will happen even if the first URL is tagged with UTM campaign parameters.

As a short-term fix, you can try to repair the damage by simply adding the missing tracking code. To prevent it happening again, carry out a thorough Analytics audit, move to a GTM-based tracking implementation, and promote a culture of data-driven marketing.

4. Improper redirection

This is an easy one. Don’t use meta refreshes or JavaScript-based redirects — these can wipe or replace referrer data, leading to direct traffic in Analytics. You should also be meticulous with your server-side redirects, and — as is often recommended by SEOs — audit your redirect file frequently. Complex chains are more likely to result in a loss of referrer data, and you run the risk of UTM parameters getting stripped out.

Once again, control what you can: use carefully mapped (i.e. non-chained) code 301 server-side redirects to preserve referrer data wherever possible.

5. Non-web documents

Links in Microsoft Word documents, slide decks, or PDFs do not pass referrer information. By default, users who click these links will appear in your reports as direct traffic. Clicks from native mobile apps (particularly those with embedded "in-app" browsers) are similarly prone to stripping out referrer data.

To a degree, this is unavoidable. Much like so-called “dark social” visits (discussed in detail below), non-web links will inevitably result in some quantity of direct traffic. However, you also have an opportunity here to control the controllables.

If you publish whitepapers or offer downloadable PDF guides, for example, you should be tagging the embedded hyperlinks with UTM campaign parameters. You’d never even contemplate launching an email marketing campaign without campaign tracking (I hope), so why would you distribute any other kind of freebie without similarly tracking its success? In some ways this is even more important, since these kinds of downloadables often have a longevity not seen in a single email campaign. Here’s an example of a properly tagged URL which we would embed as a link:

https://builtvisible.com/embedded-whitepaper-url/?..._medium=offline_document&utm_campaign=201711_utm_whitepaper

The same goes for URLs in your offline marketing materials. For major campaigns it’s common practice to select a short, memorable URL (e.g. moz.com/tv/) and design an entirely new landing page. It’s possible to bypass page creation altogether: simply redirect the vanity URL to an existing page URL which is properly tagged with UTM parameters.

So, whether you tag your URLs directly, use redirected vanity URLs, or — if you think UTM parameters are ugly — opt for some crazy-ass hash-fragment solution with GTM (read more here), the takeaway is the same: use campaign parameters wherever it’s appropriate to do so.

6. “Dark social”

This is a big one, and probably the least well understood by marketers.

The term “dark social” was first coined back in 2012 by Alexis Madrigal in an article for The Atlantic. Essentially it refers to methods of social sharing which cannot easily be attributed to a particular source, like email, instant messaging, Skype, WhatsApp, and Facebook Messenger.

Recent studies have found that upwards of 80% of consumers’ outbound sharing from publishers’ and marketers’ websites now occurs via these private channels. In terms of numbers of active users, messaging apps are outpacing social networking apps. All the activity driven by these thriving platforms is typically bucketed as direct traffic by web analytics software.

People who use the ambiguous phrase “social media marketing” are typically referring to advertising: you broadcast your message and hope people will listen. Even if you overcome consumer indifference with a well-targeted campaign, any subsequent interactions are affected by their very public nature. The privacy of dark social, by contrast, represents a potential goldmine of intimate, targeted, and relevant interactions with high conversion potential. Nebulous and difficult-to-track though it may be, dark social has the potential to let marketers tap into elusive power of word of mouth.

So, how can we minimize the amount of dark social traffic which is bucketed under direct? The unfortunate truth is that there is no magic bullet: proper attribution of dark social requires rigorous campaign tracking. The optimal approach will vary greatly based on your industry, audience, proposition, and so on. For many websites, however, a good first step is to provide convenient and properly configured sharing buttons for private platforms like email, WhatsApp, and Slack, thereby ensuring that users share URLs appended with UTM parameters (or vanity/shortened URLs which redirect to the same). This will go some way towards shining a light on part of your dark social traffic.

Checklist: Minimizing direct traffic

To summarize what we’ve already discussed, here are the steps you can take to minimize the level of unnecessary direct traffic in your reports:

1. Migrate to HTTPS: Not only is the secure protocol your gateway to HTTP/2 and the future of the web, it will also have an enormously positive effect on your ability to track referral traffic.
2. Manage your use of redirects: Avoid chains and eliminate client-side redirection in favour of carefully-mapped, single-hop, server-side 301s. If you use vanity URLs to redirect to pages with UTM parameters, be meticulous.
3. Get really good at campaign tagging: Even amongst data-driven marketers I encounter the belief that UTM begins and ends with switching on automatic tagging in your email marketing software. Others go to the other extreme, doing silly things like tagging internal links. Control what you can, and your ability to carry out meaningful attribution will markedly improve.
4. Conduct an Analytics audit: Data integrity is vital, so consider this essential when assessing the success of your marketing. It’s not simply a case of checking for missing track code: good audits involve a review of your measurement plan and rigorous testing at page and property-level.

Adhere to these principles, and it’s often possible to achieve a dramatic reduction in the level of direct traffic reported in Analytics. The following example involved an HTTPS migration, GTM migration (as part of an Analytics review), and an overhaul of internal campaign tracking processes over the course of about 6 months:

But the saga of direct traffic doesn’t end there! Once this channel is “clean” — that is, once you’ve minimized the number of avoidable pollutants — what remains might actually be one of your most valuable traffic segments.

Analyze! Or: why direct traffic can actually be pretty cool

For reasons we’ve already discussed, traffic from bookmarks and dark social is an enormously valuable segment to analyze. These are likely to be some of your most loyal and engaged users, and it’s not uncommon to see a notably higher conversion rate for a clean direct channel compared to the site average. You should make the effort to get to know them.

The number of potential avenues to explore is infinite, but here are some good starting points:

• Build meaningful custom segments, defining a subset of your direct traffic based on their landing page, location, device, repeat visit or purchase behavior, or even enhanced e-commerce interactions.
• Track meaningful engagement metrics using modern GTM triggers such as element visibility and native scroll tracking. Measure how your direct users are using and viewing your content.
• Watch for correlations with your other marketing activities, and use it as an opportunity to refine your tagging practices and segment definitions. Create a custom alert which watches for spikes in direct traffic.
• Familiarize yourself with flow reports to get an understanding of how your direct traffic is converting. By using Goal Flow and Behavior Flow reports with segmentation, it’s often possible to glean actionable insights which can be applied to the site as a whole.
• Ask your users for help! If you’ve isolated a valuable segment of traffic which eludes deeper analysis, add a button to the page offering visitors a free downloadable ebook if they tell you how they discovered your page.
• Start thinking about lifetime value, if you haven’t already — overhauling your attribution model or implementing User ID are good steps towards overcoming the indifference or frustration felt by marketers towards direct traffic.

I hope this guide has been useful. With any luck, you arrived looking for ways to reduce the level of direct traffic in your reports, and left with some new ideas for how to better analyze this valuable segment of users.

Thanks for reading!

Sign up for The Moz Top 10, a semimonthly mailer updating you on the top ten hottest pieces of SEO news, tips, and rad links uncovered by the Moz team. Think of it as your exclusive digest of stuff you don't have time to hunt down but want to read!

from Moz Blog https://moz.com/blog/guide-to-direct-traffic-google-analytics
via IFTTT

Innovaciones de Google AdWords que mejorarán los resultados de tu empresa

Innovaciones de Google AdWords que mejorarán los resultados de tu empresa

Los consumidores son más curiosos, exigentes e impacientes que nunca, especialmente en Navidades. Hemos rediseñado Google AdWords para que puedas llegar de forma rápida y sencilla a estos consumidores que compran principalmente a través de sus dispositivos móviles. Actualmente, estamos introduciendo innovaciones que solo están disponibles en la nueva experiencia. Con estos productos conseguirás ahorrar tiempo y mejorar tu rendimiento en cualquier iniciativa que emprendas, desde promocionar tus últimas ofertas hasta encontrar formas de ampliar tu negocio. A continuación, te contamos cómo algunos anunciantes han conseguido aumentar el porcentaje de conversiones y el retorno de la inversión publicitaria tras aplicar estas innovaciones en sus campañas.

Destaca tus principales ofertas con extensiones de promoción

Los usuarios siempre están buscando ofertas, ya sean descuentos en regalos de Navidad o vuelos más económicos. De hecho, siete de cada diez usuarios de Internet buscan ofertas o descuentos antes de visitar una tienda.1 Para ayudarte a atraer estos clientes con tus últimas ofertas, te presentamos las extensiones de promoción.

Muestra tus últimas ofertas con las extensiones de promoción

Con las extensiones de promoción podrás tener tus promociones siempre al día sin necesidad de crear más anuncios. En el espacio restante podrás incluir contenido más específico, como tus términos de marca o una llamada a la acción clara.

Supongamos que tienes una zapatería y quieres usar las extensiones de promoción para mostrar un código promocional del 30 % de descuento en todos tus pedidos de Black Friday. Puedes destacar aún más este tipo de ofertas de temporada en los anuncios seleccionando uno de los doce tipos de promociones especiales, como Black Friday o Vuelta al cole.

Torrid y Shoe Carnival son algunas de las marcas que ya han conseguido excelentes resultados con las extensiones de promoción:

"Estas extensiones nos permiten comunicar de forma eficaz nuestras promociones sin renunciar a la calidad y la idoneidad de nuestro mensaje principal. Gracias a esta herramienta, hemos conseguido un aumento del 30 % en el porcentaje de conversiones". David Chau, analista sénior de Marketing Digital de Marcas de Torrid

"Al añadir extensiones de promoción hemos dado a los clientes un motivo más para visitar nuestro sitio web y comprar ahí lo que buscan, y hemos conseguido aumentar el ROAS un 20 %. Estas extensiones son un recurso publicitario imprescindible para todos los anunciantes de comercio electrónico". Michael Nuss, director de Marketing Digital de Shoe Carnival

Prueba nuevas ideas con variaciones de anuncios

A veces, un pequeño cambio en el texto de los anuncios (como añadir un detalle navideño o usar una llamada a la acción diferente) puede tener un impacto enorme en el rendimiento. Por ese motivo, estamos implementando gradualmente variaciones de anuncios, una forma rápida y fácil de probar cambios en los anuncios de texto a gran escala.

Por ejemplo, puedes probar cómo afectaría al rendimiento de tus anuncios de texto añadir "Feliz Navidad". Las variaciones de anuncios permiten probar este cambio en miles de anuncios con solo unos clics. De hecho, algunos anunciantes han configurado variaciones de más de un millón de anuncios en menos de un minuto.2

En cuanto las variaciones que hayas creado tengan relevancia estadística, obtendrás los resultados de la prueba. Si una variación está obteniendo un buen rendimiento, puedes sustituir rápidamente todos tus anuncios por esa variación.

Empresas como Merkle y Agoda ya están usando variaciones de anuncios para probar, medir y aplicar variaciones con las que mejorar los resultados en menos tiempo.

 

La agencia de marketing basado en rendimiento Merkle ayudó a uno de sus clientes, una importante empresa de educación online, a incrementar los clics en un 13 % y las conversiones en un 14 % cuando las pruebas de variaciones de anuncios revelaron que su rendimiento mejoraría si expandían los anuncios de texto e implementaban rotaciones de anuncios optimizadas.

"Las variaciones de anuncios nos han permitido probar cambios en el texto de todos los anuncios de nuestra cuenta en solo unos minutos, lo que antes significaba horas de trabajo manual. Ahora podemos probar rápidamente el texto de los anuncios e implementar mejoras para incrementar nuestro rendimiento". Robert Tayon, responsable de PPC en Agoda

Llega a los compradores adecuados con audiencias de intención personalizadas

En estos momentos, puede haber usuarios buscando regalos y dispuestos a adquirir los productos o servicios que ofrece tu empresa. Para llegar a los usuarios que ya están en el momento "quiero comprar" también estamos implementando las audiencias de intención personalizadas en la Red de Display de Google. Con este tipo de audiencia, podrás llegar fácilmente a las personas que quieren comprar los productos que ofreces. Para conseguirlo, nos basamos en los datos de tus campañas, sitios web y canales de YouTube.

Supongamos que tienes una agencia de viajes y ofreces escapadas navideñas. Google podría crear automáticamente una audiencia de personas que busquen "estaciones de esquí todo incluido" o "vuelos a Canarias" y mostrarte las estimaciones de cobertura y rendimiento de cada audiencia. De esta manera, podrías planificar tus campañas con precisión.

Descubre nuevas oportunidades para ampliar tu negocio

Si quieres conocer otras formas de mejorar el rendimiento de tus campaña esta Navidad, visita la página Oportunidades. Encontrarás recomendaciones más útiles, estadísticas más relevantes y prácticas recomendadas para cumplir tus objetivos de negocio. Las oportunidades están disponibles en las cuentas de administrador e incluyen la capacidad de filtrar por categoría (como por pujas y presupuesto). De esta manera, están mejor organizadas para que puedas aplicarlas a todas tus cuentas y campañas con solo unos clics.

Algunos de nuestros clientes, como Mindshare, han afirmado que las mejoras introducidas en la página Oportunidades les sirvieron para conseguir sus objetivos de negocio:

"En la página Oportunidades de nuestra cuenta de administrador podemos identificar rápidamente mejoras en términos de optimización y eficacia, calcular efectos en el coste, el tráfico y el rendimiento en distintos mercados, e implementar mejoras con solo un clic". Amy Perkins, directora de cuentas de Publicidad en Buscadores, Mindshare

Empezar

Inicia sesión en la nueva experiencia de AdWords para empezar a usar estas innovadoras herramientas y mejorar los resultados de tu empresa.

Publicado por Anthony Chavez, director de Gestión de Productos, Google AdWords

1 Google/Ipsos Connect, How devices connect consumers to stores (Cómo conectan los dispositivos a los consumidores con las tiendas), marzo del 2016

2 Datos internos de Google, octubre del 2017

from Dentro de AdWords - España http://adwords-es.googleblog.com/2017/11/innovaciones-de-google-adwords-que_29.html
via IFTTT

How to Write Marketing Case Studies That Convert

Posted by kerryjones

In my last post, I discussed why your top funnel content shouldn’t be all about your brand. Today I’m making a 180-degree turn and covering the value of content at the opposite end of the spectrum: content that’s directly about your business and offers proof of your effectiveness.

Specifically, I’m talking about case studies.

I’m a big believer in investing in case studies because I’ve seen firsthand what happened once we started doing so at Fractl. Case studies were a huge game changer for our B2B marketing efforts. For one, our case studies portfolio page brings in a lot of traffic – it’s the second most-visited page on our site, aside from our home page. It also brings in a significant volume of organic traffic, being our fourth most-visited page from organic searches. Most importantly, our case studies are highly effective at converting visitors to leads – about half of our leads view at least one of our case studies before contacting us.

Assuming anyone who reads the Moz Blog is performing some type of marketing function, I’m zeroing in on how to write a compelling marketing case study that differentiates your service offering and pulls prospects down the sales funnel. However, what I’m sharing can be used as a framework for creating case studies in any industry.

Get your client on board with a case study

Marketers shy away from creating case studies for a few reasons:

1. They’re too busy “in the weeds” with deliverables.
2. They don’t think their results are impressive enough.
3. They don’t have clients’ permission to create case studies.

While I can’t help you with #1 and #2 (it’s up to you to make the time and to get the results deserving of a case study!), I do have some advice on #3.

In a perfect world, clients would encourage you to share every little detail of your time working together. In reality, most clients expect you to remain tight-lipped about the work you’ve done for them.

Understandably, this might discourage you from creating any case studies. But it shouldn’t.

With some compromising, chances are your client will be game for a case study. We’ve noticed the following two objections are common regarding case studies.

Client objection 1: “We don’t want to share specific numbers.”

At first it you may think, “Why bother?” if a client tells you this, but don’t let it hold you back. (Truth is, the majority of your clients will probably feel this way).

In this instance, you’ll want your case study to focus on highlighting the strategy and describing projects, while steering away from showing specific numbers regarding short and long-term results. Believe it or not, the solution part of the case study can be just as, or more, compelling than the results. (I’ll get to that shortly.)

And don’t worry, you don’t have to completely leave out the results. One way to get around not sharing actual numbers but still showing results is to use growth percentages.

Specific numbers: “Grew organic traffic from 5,000 to 7,500 visitors per month”

Growth percentage: “Increased organic traffic by 150%”

We do this for most of our case studies at Fractl, and our clients are totally fine with it.

Client objection 2: “We don’t want to reveal our marketing strategy to competitors.”

A fear of giving away too much intel to competitors is especially common in highly competitive niches.

So how do you get around this?

Keep it anonymous. Don’t reveal who the client is and keep it vague about what niche they’re in. This can be as ambiguous as referring to the client as “Client A” or slightly more specific (“our client in the auto industry”). Instead, the case study will focus on the process and results – this is what your prospects care about, anyway.

Gather different perspectives

Unless you were directly working with the client who you are writing the case study about, you will need to conduct a few interviews to get a full picture of the who, what, how, and why of the engagement. At Fractl, our marketing team puts together case studies based on interviews with clients and the internal team who worked on the client’s account.

The client

Arrange an interview with the client, either on a call or via email. If you have multiple contacts within the client’s team, interview the main point of contact who has been the most involved in the engagement.

What to ask:

• What challenge were you facing that you hired us to help with?
• Had you previously tried to solve this challenge (working with another vendor, using internal resources, etc.)?
• What were your goals for the engagement?
• How did you benefit from the engagement (short-term and long-term results, unexpected wins, etc.)?

You’ll also want to run the case study draft by the client before publishing it, which offers another chance for their feedback.

The project team

Who was responsible for this client’s account? Speak with the team behind the strategy and execution.

What to ask:

• How was the strategy formed? Were strategic decisions made based on your experience and expertise, competitive research, etc.?
• What project(s) were launched as part of the strategy? What was the most successful project?
• Were there any unexpected issues that you overcame?
• Did you refine the strategy to improve results?
• How did you and the client work together? Was there a lot of collaboration or was the client more hands-off? (Many prospective clients are curious about what their level of involvement in your process would look like.)
• What did you learn during the engagement? Any takeaways?

Include the three crucial elements of a case study

There’s more than one way to package case studies, but the most convincing ones all have something in common: great storytelling. To ensure you’re telling a proper narrative, your case study should include the conflict, the resolution, and the happy ending (but not necessarily in this order).

We find a case study is most compelling when you get straight to the point, rather than making someone read the entire case study before seeing the results. To grab readers’ attention, we begin with a quick overview of conflict-resolution-happy ending right in the introduction.

For example, in our Fanatics case study, we summarized the most pertinent details in the first three paragraphs. The rest of the case study focused on the resolution and examples of specific projects.

Let’s take a look at what the conflict, resolution, and happy ending of your case study should include.

The Conflict: What goal did the client want to accomplish?

Typically serving as the introduction of the case study, “the conflict” should briefly describe the client’s business, the problem they hired you to work on, and what was keeping them from fixing this problem (ex. lack of internal resources or internal expertise). This helps readers identify with the problem the client faced and empathize with them – which can help them envision coming to you for help with this problem, too.

Here are a few examples of “conflicts” from our case studies:

• “Movoto engaged Fractl to showcase its authority on local markets by increasing brand recognition, driving traffic to its website, and earning links back to on-site content.”
• “Alexa came to us looking to increase awareness – not just around the Alexa name but also its resources. Many people had known Alexa as the site-ranking destination; however, Alexa also provides SEO tools that are invaluable to marketers.”
• “While they already had strong brand recognition within the link building and SEO communities, Buzzstream came to Fractl for help with launching large-scale campaigns that would position them as thought leaders and provide long-term value for their brand.”

The Resolution: How did you solve the conflict?

Case studies are obviously great for showing proof of results you’ve achieved for clients. But perhaps more importantly, case studies give prospective clients a glimpse into your processes and how you approach problems. A great case study paints a picture of what it’s like to work with you.

For this reason, the bulk of your case study should detail the resolution, sharing as much specific information as you and your client are comfortable with; the more you’re able to share, the more you can highlight your strategic thinking and problem solving abilities.

The following snippets from our case studies are examples of details you may want to include as part of your solution section:

What our strategy encompassed:

“Mixing evergreen content and timely content helped usher new and existing audience members to the We Are Fanatics blog in record numbers. We focused on presenting interesting data through evergreen content that appealed to a variety of sports fans as well as content that capitalized on current interest around major sporting events.” - from Fanatics case study

How strategy was decided:

“We began by forming our ideation process around Movoto’s key real estate themes. Buying, selling, or renting a home is an inherently emotional experience, so we turned to our research on viral emotions to figure out how to identify with and engage the audience and Movoto’s prospective clients. Based on this, we decided to build on the high-arousal feelings of curiosity, interest, and trust that would be part of the experience of moving.

We tapped into familiar cultural references and topics that would pique interest in the regions consumers were considering. Comic book characters served us well in this regard, as did combining publicly available data (such as high school graduation rates or IQ averages) with our own original research.” - from Movoto case study

Why strategy was changed based on initial results:

“After analyzing the initial campaigns, we determined the most effective strategy included a combination of the following content types designed to achieve different goals [case study then lists the three types of content and goals]...

This strategy yielded even better results, with some campaigns achieving up to 4 times the amount of featured stories and social engagement that we achieved in earlier campaigns.” - from BuzzStream case study

How our approach was tailored to the client’s niche:

“In general, when our promotions team starts its outreach, they’ll email writers and editors who they think would be a good fit for the content. If the writer or editor responds, they often ask for more information or say they’re going to do a write-up that incorporates our project. From there, the story is up to publishers – they pick and choose which visual assets they want to incorporate in their post, and they shape the narrative.

What we discovered was that, in the marketing niche, publishers preferred to feature other experts’ opinions in the form of guest posts rather than using our assets in a piece they were already working on. We had suspected this (as our Fractl marketing team often contributes guest columns to marketing publications), but we confirmed that guest posts were going to make up the majority of our outreach efforts after performing outreach for Alexa’s campaigns.” - from Alexa case study

Who worked on the project:

Since the interviews you conduct with your internal team will inform the solution section of the case study, you may want to give individuals credit via quotes or anecdotes as a means to humanize the people behind the work. In the example below, one of our case studies featured a Q&A section with one of the project leads.

The Happy Ending: What did your resolution achieve?

Obviously, this is the part where you share your results. As I mentioned previously, we like to feature the results at the beginning of the case study, rather than buried at the end.

In our Superdrug Online Doctor case study, we summarized the overall results our campaigns achieved over 16 months:

But the happy ending isn’t finished here.

A lot of case studies fail to answer an important question: What impact did the results have on the client’s business? Be sure to tie in how the results you achieved had a bottom-line impact.

In the case of Superdrug Online Doctor, the results from our campaigns lead to a 238% increase in organic traffic. This type of outcome has tangible value for the client.

You can also share secondary benefits in addition to the primary goals the client hired you for.

In the case of our client Busbud, who hired us for SEO-oriented goals, we included examples of secondary results.

Busbud saw positive impacts beyond SEO, though, including the following:

• Increased blog traffic
• New partnerships as a result of more brands reaching out to work with the site
• Brand recognition at large industry events
• An uptick in hiring
• Featured as a “best practice” case study at an SEO conference

Similarly, in our Fractl brand marketing case study, which focused on lead generation, we listed all of the additional benefits resulting from our strategy.

How to get the most out of your case studies

You’ve published your case study, now what should you do with it?

Build a case study page on your site

Once you've created several case studies, I recommend housing them all on the same page. This makes it easy to show off your results in a single snapshot and saves visitors from searching through your blog or clicking on a category tag to find all of your case studies in one place. Make this page easy to find through your site navigation and internal links.

While it probably goes without saying, make sure to optimize this page for search. When we initially created our case study portfolio page, we underestimated its potential to bring in search traffic and assumed it would mostly be accessed from our site navigation. Because of this, we were previously using a generic URL to house our case study portfolio. Since updating the URL from “frac.tl/our-work” to “frac.tl/content-marketing-case-studies,” we’ve jumped from page 2 to the top #1–3 positions for a specific phrase we wanted to rank for (“content marketing case studies”), which attracts highly relevant search traffic.

Use case studies as concrete proof in blog posts and off-site content

Case studies can serve as tangible examples that back up your claims. Did you state that creating original content for six months can double your organic traffic? On its own, this assertion may not be believable to some, but a case study showing these results will make your claim credible.

In a post on the Curata blog, my colleague Andrea Lehr used our BuzzStream case study to back up her assertion that in order to attract links, social shares, and traffic, your off-site content should appeal to an audience beyond your target customer. Showing the results this strategy earned for a client gives a lot more weight to her advice.

On the same note, case studies have high linking potential. Not only do they make a credible citation for your own off-site content, they can also be cited by others writing about your service/product vertical. Making industry publishers aware that you publish case studies by reaching out when you’ve released a new case study can lead to links down the road.

Repurpose your case studies into multiple content formats

Creating a case study takes a lot of time, but fortunately it can be reused again and again in various applications.

Long-form case studies

While a case study featured on your site may only be a few hundred words, creating a more in-depth version is a chance to reveal more details. If you want to get your case study featured on other sites, consider writing a long-form version as a guest post.

Most of the case studies you’ll find on the Moz Blog are extremely detailed:

• How We Ranked #1 for a High Volume Keyword in Under 3 Months walks through the 8-step process used to achieve the impressive result called out in the headline.
• The Anatomy of a $97 Million Page: A CRO Case Study offers much greater detail and insights than the case studies featured on the Conversion Wizards site.
• The Roadmap for Creating Share-Worthy Content with Massive Distribution used one of our campaign case studies to illustrate our overall process for creating shareable widely-shared content.

Video

HubSpot has hundreds of case studieson its site, dozens of which also feature supplemental video case studies, such as the one below for Eyeota.

Don’t feel like you have to create flashy videos with impressive production value, even no-frills videos can work. Within its short case study summaries, PR That Converts embeds videos of clients talking about its service. These videos are simple and short, featuring the client speaking to their webcam for a few minutes.

Speaking engagements

Marketing conferences love case studies. Look on any conference agenda, and you’re sure to notice at least a handful of speaker presentations focused on case studies. If you’re looking to secure more speaking gigs, including case studies in your speaking pitch can give you a leg up over other submissions – after all, your case studies are original data no one else can offer.

My colleague Kelsey Libert centered her MozCon presentation a few years ago around some of our viral campaign case studies.

Sales collateral

As I mentioned at the beginning of this post, many of our leads view the case studies on our site right before contacting us about working together. Once that initial contact is made, we don’t stop showing off our case studies.

We keep a running “best of” list of stats from our case studies, which allows us to quickly pull compelling stats to share in written and verbal conversations. Our pitch and proposal decks feature bite-sized versions of our case studies.

Consider how you can incorporate case studies into various touch points throughout your sales process and make sure the case studies you share align with the industry and goals of whoever you're speaking with.

I’ve shared a few of my favorite ways to repurpose case studies here but there are at least a dozen other applications, from email marketing to webinars to gated content to printed marketing materials. I even link to our case studies page in my email signature.

My last bit of advice: Don’t expect immediate results. Case studies typically pay off over time. The good news is it’s worth the wait, because case studies retain their value – we’re still seeing leads come in and getting links to case studies we created three or more years ago. By extending their lifespan through repurposing, the case studies you create today can remain an essential part of your marketing strategy for years to come.

Sign up for The Moz Top 10, a semimonthly mailer updating you on the top ten hottest pieces of SEO news, tips, and rad links uncovered by the Moz team. Think of it as your exclusive digest of stuff you don't have time to hunt down but want to read!

from Moz Blog https://moz.com/blog/how-to-write-marketing-case-studies-that-convert
via IFTTT

Recordatorio sobre el marcado de eventos

Últimamente hemos recibido comentarios de usuarios que afirman haber visto elementos que no son eventos, como cupones, en los resultados de búsqueda en que aparecen fragmentos de eventos.

Esta situación confunde mucho a los usuarios y, además, infringe nuestras directrices, a las que hemos añadido más información sobre el tema. En concreto, ¿cuál es el problema?

Hemos observado que muchos editores de sitios web que ofrecen cupones describen sus ofertas con el marcado de eventos. Aunque usar un cupón de descuento puede ser algo muy especial, no por eso hay que considerar los cupones como si fueran eventos o saleEvents. Cuando se describe algo que no es un evento con el marcado de eventos, se crea una mala experiencia de usuario, porque se mostrará un resultado enriquecido de algo que sucederá en un momento determinado, aunque no haya ningún evento real.

A continuación se muestran algunos ejemplos que ilustran el problema: Dado que en estos casos se generan experiencias de usuario engañosas, es posible que realicemos acciones manuales para corregirlas. Si tu sitio web se ve afectado por alguna de estas medidas, se mostrará una notificación en tu cuenta de Search Console. Si realizamos una acción manual en tu sitio web, es posible que no se utilice el marcado de datos estructurados de todo el sitio web en los resultados de búsqueda.

Si bien en esta entrada del blog destacamos específicamente el caso de los cupones, esta información también se aplica a cualquier otro elemento que no sea un evento y que esté marcado como tal; en realidad, se aplica al hecho de etiquetar elementos con un tipo de marcado que no sea el adecuado.

Para obtener más información, consulta la documentación para desarrolladores o, si tienes más preguntas, visita nuestro foro para webmasters.

Escrito por Sven Naumann, del equipo de Confianza y seguridad de la Búsqueda

from El Blog para Webmasters http://webmaster-es.googleblog.com/2017/11/recordatorio-sobre-el-marcado-de-eventos.html
via IFTTT

Fomentar la interacción de los usuarios con páginas AMP de gran calidad

Estamos cambiando el modo de aplicar nuestras políticas sobre la equivalencia de contenido en AMP para mejorar la experiencia de los usuarios con este tipo de resultados. A partir del 1 de febrero del 2018, en las políticas se exigirá que el contenido de las páginas AMP sea equiparable al contenido de sus páginas canónicas (originales). No hemos modificado la política de posicionamiento con respecto a AMP, que no se considera un indicador de posicionamiento. En el 2015, se hizo público el proyecto de código abierto Accelerated Mobile Pages (AMP) y, desde entonces, su crecimiento ha sido espectacular: el formato AMP se ha implementado en más de 25 millones de dominios. Con este progreso tan rápido también viene la responsabilidad de asegurarse de que los usuarios sigan disfrutando del contenido de una manera óptima, lo que, al fin y al cabo, genera una mayor interacción con el contenido de editores. A veces, los webmasters publican dos versiones de su contenido: una página canónica que no se basa en AMP y una página AMP. Lo ideal sería que ambas fueran equivalentes; así, los usuarios podrían acceder al mismo contenido, con la única diferencia que la experiencia de la versión AMP sería más rápida y fluida. No obstante, en algunos casos el contenido de las páginas AMP no es el mismo que el de sus páginas originales (canónicas). En contadas ocasiones, en las páginas AMP se muestra solo un fragmento del contenido real, lo que genera una pésima experiencia de usuario, puesto que hay muy poco contenido y los usuarios tienen que hacer clic dos veces para acceder a lo que buscan. A continuación, tienes un ejemplo de lo que acabamos de comentar: se ofrece un breve fragmento del artículo principal y, posteriormente, se pide a los usuarios que hagan clic en un enlace para acceder a otra página donde está el artículo entero. La tecnología AMP se ha diseñado con el objetivo de mejorar el rendimiento de la Web y ofrecer una experiencia de consumo de contenido rápida y coherente. Por tanto, pronto empezaremos a exigir que, para que las páginas AMP aparezcan como tales en la Búsqueda de Google, tanto estas como sus páginas canónicas tengan un contenido muy similar. Si en una página AMP no se incluye el mismo contenido importante que en su equivalente que no es AMP, dirigiremos los usuarios a esta última. Este cambio no afecta al posicionamiento en los resultados de la Búsqueda. No obstante, no se incluirán estas páginas en las funciones de la Búsqueda que requieren AMP, como el carrusel Noticias destacadas de AMP. Además, enviaremos a los webmasters en cuestión un mensaje de acción manual en Search Console, y ofreceremos a los editores la oportunidad de solucionar el problema para que sus páginas AMP puedan volver a publicarse. En el sitio web del proyecto de código abierto de AMP se incluyen guías útiles para aprender a diseñar páginas AMP rápidas, atractivas y eficaces. Esperamos que este cambio anime a los webmasters a ofrecer el mismo contenido en páginas canónicas y sus equivalentes AMP. De este modo, conseguirán una mejor experiencia en su sitio web, lo que, a su vez, mejorará la satisfacción de sus usuarios. Escrito por Ashish Mehta, director de producto. Publicado por Joan Ortiz, equipo de calidad de búsqueda.

from El Blog para Webmasters http://webmaster-es.googleblog.com/2017/11/fomentar-la-interaccion-de-los-usuarios-con-paginas-amp.html
via IFTTT

Knowledge Graph Eats Featured Snippets, Jumps +30%

Posted by Dr-Pete

Over the past two years, we've seen a steady and substantial increase in Featured Snippets on Google SERPs. In our 10,000-keyword daily tracking set, Featured Snippets have gone from about 5.5% of queries in November 2015 to a recent high of just over 16% (roughly tripling). Other data sets, with longer tail searches, have shown even higher prevalence.

Near the end of October (far-right of the graph), we saw our first significant dip (spotted by Brian Patterson on SEL). This dip occurred over about a 4-day period, and represents roughly a 10% drop in searches with Featured Snippets. Here's an enhanced, 2-week view (note: Y-axis is expanded to show the day-over-day changes more clearly):

Given the up-and-to-the-right history of Featured Snippets and the investments people have been making optimizing for these results, a 10% drop is worthy of our attention.

What happened, exactly?

To be honest, when we investigate changes like this, the best we can usually do is produce a list of keywords that lost Featured Snippets. Usually, we focus on high-volume keywords, which tend to be more interesting. Here's a list of keywords that lost Featured Snippets during that time period:

• CRM
• ERP
• MBA
• buddhism
• web design
• anger management
• hosting
• DSL
• ActiveX
• ovulation

From an explanatory standpoint, this list isn't usually very helpful – what exactly do "web design", "buddhism", and "ovulation" have in common (please, don't answer that)? In this case, though, there was a clear and interesting pattern. Almost all of the queries that lost Featured Snippets gained Knowledge Panels that look something like this one:

These new panels account for the vast majority of the lost Featured Snippets I've spot-checked, and all of them are general Knowledge Panels coming directly from Wikipedia. In some cases, Google is using a more generic Knowledge Graph entry. For example, "HDMI cables", which used to show a Featured Snippet (dominated by Amazon, last I checked), now shows no snippet and a generic panel for "HDMI":

In very rare cases, a SERP added the new Knowledge Panel but retained the Featured Snippet, such as the top of this search for "credit score":

These situations seemed to be the exceptions to the rule.

What about other SERPs?

The SERPs that lost Featured Snippets were only one part of this story. Over the same time period, we saw an explosion (about +30%) in Knowledge Panels:

This Y-axis has not been magnified – the jump in Knowledge Panels is clearly visible even at normal scale. Other tracking sites saw similar, dramatic increases, including this data from RankRanger. This jump appears to be a similar type of descriptive panel, ranging from commercial keywords, like "wedding dresses" and "Halloween costumes"...

...to brand keywords, like "Ray-Ban"...

Unlike definition boxes, many of these new panels appear on words and phrases that appear to be common knowledge and add little value. Here's a panel on "job search"...

I suspect that most people searching for "job search" or "job hunting" don't need it defined. Likewise, people searching for "travel" probably weren't confused about what travel actually is...

Thanks for clearing that up, Google. I've decided to spare you all and leave out a screenshot for "toilet" (go ahead and Google it). Almost all of these new panels appear to be driven by Wikipedia (or Wikidata), and most of them are single-paragraph definitions of terms.

Were there other changes?

During the exact same period, we also noticed a drop in SERPs with inline image results. Here's a graph of the same 2-week period reported for the other features:

This drop almost exactly mirrors the increase in Knowledge Panels. In cases where the new panels were added, those panels almost always contain a block of images at the top. This block seems to have replaced inline image results. It's interesting to note that, because image blocks in the left-hand column consume an organic position, this change freed up an organic spot on the first page of results for those terms.

Why did Google do this?

It's likely that Google is trying to standardize answers for common terms, and perhaps they were seeing quality or consistency issues in Featured Snippets. In some cases, like "HDMI cables", Featured Snippets were often coming from top e-commerce sites, which are trying to sell products. These aren't always a good fit for unbiased definitions. Its also likely that Google would like to beef up the Knowledge Graph and rely less, where possible, on outside sites for answers.

Unfortunately, this also means that the answers are coming from a much less diverse pool (and, from what we've seen, almost entirely from Wikipedia), and it reduces the organic opportunity for sites that were previously ranking for or trying to compete for Featured Snippets. In many cases, these new panels also seem to add very little. Someone searching for "ERP" might be helped by a brief definition, but someone searching for "travel" is unlikely looking to have it explained to them.

As always, there's not much we can do but monitor the situation and adapt. Featured Snippets are still at historically high levels and represent a legitimate organic opportunity. There's also win-win, since efforts invested in winning Featured Snippets tend to improve organic ranking and, done right, can produce a better user experience for both search and website visitors.

Sign up for The Moz Top 10, a semimonthly mailer updating you on the top ten hottest pieces of SEO news, tips, and rad links uncovered by the Moz team. Think of it as your exclusive digest of stuff you don't have time to hunt down but want to read!

from Moz Blog https://moz.com/blog/knowledge-graph-eats-featured-snippets
via IFTTT

Which of My Competitor's Keywords Should (& Shouldn't ) I Target? - Whiteboard Friday

Posted by randfish

You don't want to try to rank for every one of your competitors' keywords. Like most things with SEO, it's important to be strategic and intentional with your decisions. In today's Whiteboard Friday, Rand shares his recommended process for understanding your funnel, identifying the right competitors to track, and prioritizing which of their keywords you ought to target.

Click on the whiteboard image above to open a high-resolution version in a new tab!

Video Transcription

Howdy, Moz fans, and welcome to another edition of Whiteboard Friday. So this week we're chatting about your competitors' keywords and which of those competitive keywords you might want to actually target versus not.

Many folks use tools, like SEMrush and Ahrefs and KeywordSpy and Spyfu and Moz's Keyword Explorer, which now has this feature too, where they look at: What are the keywords that my competitors rank for, that I may be interested in? This is actually a pretty smart way to do keyword research. Not the only way, but a smart way to do it. But the challenge comes in when you start looking at your competitors' keywords and then realizing actually which of these should I go after and in what priority order. In the world of competitive keywords, there's actually a little bit of a difference between classic keyword research.

So here I've plugged in Hammer and Heels, which is a small, online furniture store that has some cool designer furniture, and Dania Furniture, which is a competitor of theirs — they're local in the Seattle area, but carry sort of modern, Scandinavian furniture — and IndustrialHome.com, similar space. So all three of these in a similar space, and you can see sort of keywords that return that several of these, one or more of these rank for. I put together difficulty, volume, and organic click-through rate, which are some of the metrics that you'll find. You'll find these metrics actually in most of the tools that I just mentioned.

Process:

So when I'm looking at this list, which ones do I want to actually go after and not, and how do I choose? Well, this is the process I would recommend.

I. Try and make sure you first understand your keyword to conversion funnel.

So if you've got a classic sort of funnel, you have people buying down here — this is a purchase — and you have people who search for particular keywords up here, and if you understand which people you lose and which people actually make it through the buying process, that's going to be very helpful in knowing which of these terms and phrases and which types of these terms and phrases to actually go after, because in general, when you're prioritizing competitive keywords, you probably don't want to be going after these keywords that send traffic but don't turn into conversions, unless that's actually your goal. If your goal is raw traffic only, maybe because you serve advertising or other things, or because you know that you can capture a lot of folks very well through retargeting, for example maybe Hammer and Heels says, "Hey, the biggest traffic funnel we can get because we know, with our retargeting campaigns, even if a keyword brings us someone who doesn't convert, we can convert them later very successfully," fine. Go ahead.

II. Choose competitors that tend to target the same audience(s).

So the people you plug in here should tend to be competitors that tend to target the same audiences. Otherwise, your relevance and your conversion get really hard. For example, I could have used West Elm, which does generally modern furniture as well, but they're very, very broad. They target just about everyone. I could have done Ethan Allen, which is sort of a very classic, old-school furniture maker. Probably a really different audience than these three websites. I could have done IKEA, which is sort of a low market brand for everybody. Again, not kind of the match. So when you are targeting conversion heavy, assuming that these folks were going after mostly conversion focused or retargeting focused rather than raw traffic, my suggestion would be strongly to go after sites with the same audience as you.

If you're having trouble figuring out who those people are, one suggestion is to check out a tool called SimilarWeb. It's expensive, but very powerful. You can plug in a domain and see what other domains people are likely to visit in that same space and what has audience overlap.

III. The keyword selection process should follow some of these rules:

A. Are easiest first.

So I would go after the ones that tend to be, that I think are going to be most likely for me to be able to rank for easiest. Why do I recommend that? Because it's tough in SEO with a lot of campaigns to get budget and buy-in unless you can show progress early. So any time you can choose the easiest ones first, you're going to be more successful. That's low difficulty, high odds of success, high odds that you actually have the team needed to make the content necessary to rank. I wouldn't go after competitive brands here.

B. Are similar to keywords you target that convert well now.

So if you understand this funnel well, you can use your AdWords campaign particularly well for this. So you look at your paid keywords and which ones send you highly converting traffic, boom. If you see that lighting is really successful for our furniture brand, "Oh, well look, glass globe chandelier, that's got some nice volume. Let's go after that because lighting already works for us."

Of course, you want ones that fit your existing site structure. So if you say, "Oh, we're going to have to make a blog for this, oh we need a news section, oh we need a different type of UI or UX experience before we can successfully target the content for this keyword," I'd push that down a little further.

C. High volume, low difficulty, high organic click-through rate, or SERP features you can reach.

So basically, when you look at difficulty, that's telling you how hard is it for me to rank for this potential keyword. If I look in here and I see some 50 and 60s, but I actually see a good number in the 30s and 40s, I would think that glass globe chandelier, S-shaped couch, industrial home furniture, these are pretty approachable. That's impressive stuff.

Volume, I want as high as I can get, but oftentimes high volume leads to very high difficulty.
Organic click-through rate percentage, this is essentially saying what percent of people click on the 10 blue link style, organic search results. Classic SEO will help get me there. However, if you see low numbers, like a 55% for this type of chair, you might take a look at those search results and see that a lot of images are taking up the other organic click-through, and you might say, "Hey, let's go after image SEO as well." So it's not just organic click-through rate. You can also target SERP features.

D. Are brands you carry/serve, generally not competitor's brand names.

Then last, but not least, I would urge you to go after brands when you carry and serve them, but not when you don't. So if this Ekornes chair is something that your furniture store, that Hammers and Heels actually carries, great. But if it's something that's exclusive to Dania, I wouldn't go after it. I would generally not go after competitors' brand names or branded product names with an exception, and I actually used this site to highlight this. Industrial Home Furniture is both a branded term, because it's the name of this website — Industrial Home Furniture is their brand — and it's also a generic. So in those cases, I would tell you, yes, it probably makes sense to go after a category like that.

If you follow these rules, you can generally use competitive intel on keywords to build up a really nice portfolio of targetable, high potential keywords that can bring you some serious SEO returns.

Look forward to your comments and we'll see you again next week for another edition of Whiteboard Friday. Take care.

Video transcription by Speechpad.com

Sign up for The Moz Top 10, a semimonthly mailer updating you on the top ten hottest pieces of SEO news, tips, and rad links uncovered by the Moz team. Think of it as your exclusive digest of stuff you don't have time to hunt down but want to read!

from Moz Blog https://moz.com/blog/competitors-keywords-should-shouldnt-target
via IFTTT

AMP-lify Your Digital Marketing in 2018

Posted by EricEnge

Should you AMP-lify your site in 2018?

This is a question on the mind of many publishers. To help answer it, this post is going to dive into case studies and examples showing results different companies had with AMP.

If you’re not familiar with Accelerated Mobile Pages (AMP), it’s an open-source project aimed at allowing mobile website content to render nearly instantly. This initiative that has Google as a sponsor, but it is not a program owned by Google, and it’s also supported by Bing, Baidu, Twitter, Pinterest, and many other parties.

---

Some initial background

Since its inception in 2015, AMP has come a long way. When it first hit the scene, AMP was laser-focused on media sites. The reason those types of publishers wanted to participate in AMP was clear: It would make their mobile sites much faster, AND Google was offering a great deal of incremental exposure in Google Search through the “Top Stories news carousel.”

Basically, you can only get in the Top Stories carousel on a mobile device if your page is implemented in AMP, and that made AMP a big deal for news sites. But if you’re not a news site, what’s in it for you? Simple: providing a better user experience online can lead to more positive website metrics and revenue.

We know that fast-loading websites are better for the user. But what you may not be aware of is how speed can impact the bottom line. Google-sponsored research shows that AMP leads to an average of a 2X increase in time spent on page (details can be seen here). The data also shows e-commerce sites experience an average 20 percent increase in sales conversions compared to non-AMP web pages.

Stepping outside the world of AMP for a moment, data from Amazon, Walmart, and Yahoo show a compelling impact of page load time on metrics like traffic, conversion and sales:

You can see that for Amazon, a mere one-tenth of a second increase in page load time (so one-tenth of a second slower) would drive a $1.3 billion drop in sales. So, page speed can have a direct impact on revenue. That should count for something.

What do users say about AMP? 9to5Google.com recently conducted a poll where they asked users: “Are you more inclined to click on an AMP link than a regular one?” The majority of people (51.14 percent) said yes to that question. Here are the detailed results:

This poll suggests that even for non-news sites, there is a very compelling reason to do AMP for SEO. Not because it increases your rankings, per se, but because you may get more click-throughs (more traffic) from the organic search results. Getting more traffic from organic search, after all, is the goal of SEO. In addition, you’re likely to get more time on site and more conversions.

---

How the actual implementation of AMP impacts your results

Before adopting any new technology, you need understand what you’re getting into.

At Stone Temple Consulting, we performed a research study that included 10 different types of websites that adopted AMP to see what results they had and what challenges they ran into. (Go here to see more details from the study.)

Let’s get right to the results. One site, Thrillist, converted 90 percent of their web pages over a four-week period of time. They saw a 70 percent lift in organic search traffic to their site — 50 percent of that growth came from AMP.

One anonymous participant in the study, another large media publisher, converted 95 percent of their web pages to AMP, and once again the development effort as approximately four weeks long. They saw a 67 percent lift in organic search traffic on one of their sites, and a 30% lift on another site.

So, media sites do well, but we knew that would be the case. What about e-commerce sites? Consider the case of Myntra, a company that is the largest fashion retailer in India. Their implementation took about 11 days of effort.

This implementation covered all of their main landing pages from Google, covering between 85% and 90% of their organic search traffic. For their remaining pages (such as the individual product pages) they implemented a Progressive Web App, which helps those pages perform better as well. They saw a 40% reduction in bounce rate on their pages, as well as a lift in their overall e-commerce results. You can see detailed results here.

Then there is the case of Event Tickets Center. They implemented 99.9% of their pages in AMP, and opted to create an AMP-immersive experience. Page load times on their site dropped from five to six seconds to one second.

They saw improvements in user engagement metrics, with a drop in bounce rate of 10%, an increase in pages per session of 6%, and session duration of 13%. But, the stunning stat is that they report a whopping 100% increase in e-commerce conversions. You can see the full case study here.

But it’s not always the case that AMP adopters will see a huge lift in results. When that’s not the case, there’s likely one culprit: not taking the time to implement AMP thoroughly. A big key to AMP is not to simply use a plugin, set it, and forget it.

To get good results, you’ll need to invest the time to make the AMP version of your pages substantially similar (if not identical) to your normal responsive mobile pages, and with today’s AMP, for the majority of publishers, that is absolutely possible to do. In addition to this being critical to the performance of AMP pages, on November 16, 2017, Google announced that they will exclude pages from the AMP carousel if the content on your AMP page is not substantially similar to that of your mobile responsive page.

This typically means creating brand-new templates for the major landing pages of your site, or if you are using a plugin, using their custom styling options (most of them allow this). If you’re going to take on AMP, it’s imperative that you take the time to get this right.

From our research, you can see in the slide below the results from the 10 sites that adopted AMP. Eight of those sites are colored in green, and those are the sites that saw strong results from their AMP implementation.

Then there are two listed in yellow. Those are the sites that have not yet seen good results. In both of those cases, there were implementation problems. One of the sites (the Lead Gen site above) launched pages with a broken hamburger menu, and a UI that was not up to par with the responsive mobile pages, and their metrics are weak.

We’ve been working with them to fix that and their metrics are steadily improving. The first round of fixes brought the user engagement metrics much closer to that of the mobile responsive pages, but there is still more work to do.

The other site (the retail site in yellow above) launched AMP pages without their normal faceted navigation, and also without a main menu, saw really bad results, and pulled it back down. They're working on a better AMP implementation now, and hope to relaunch soon.

So, when you think about implementing AMP, you have to go all the way with it and invest the time to do a complete job. That will make it harder, for sure, but that’s OK — you’ll be far better off in the end.

---

How we did it at Stone Temple (and what we found)

Here at Stone Temple Consulting, we experimented with AMP ourselves, using an AMP plugin versus a hand-coded AMP web page. I’ll share the results of that next.

Experiment No. 1: WordPress AMP plugin

Our site is on WordPress, and there are plugins that make the task of doing AMP easier if you have a WordPress site — however, that doesn’t mean install the plugin, turn it on, and you’re done.

Below you can see a comparison of the standard StoneTemple.com mobile page on the left contrasted with the default StoneTemple.com page that comes out of the AMP plugin that we used on the site called AMP by Automatic.

You’ll see that the look and feel is dramatically different between the two, but to be fair to the plugin, we did what I just said you shouldn’t do. We turned it on, did no customization, and thought we were done.

As a result, there’s no hamburger menu. The logo is gone. It turns out that by default, the link at the top (“Stone Temple”) goes to StoneTemple.com/amp, but there’s no page for that, so it returns a 404 error, and the list of problems goes on. As noted, we had not used the customization options available in the plugin, which can be used to rectify most (if not all) of these problems, and the pages can be customized to look a lot better. As part of an ongoing project, we’re working on that.

It’s a lot faster, yes… but is it a better user experience? Looking at the data, we can see the impact of this broken implementation of AMP. The metrics are not good.

Looking at the middle line highlighted in orange, you’ll see the standard mobile page metrics. On the top line, you’ll see the AMP page metrics — and they’re all worse: higher bounce rate, fewer pages per session, and lower average session time.

Looking back to the image of the two web pages, you can see why. We were offering an inferior user interface because we weren’t giving the user any opportunities to interact. Therefore, we got predictable results.

Experiment No. 2: Hand-coded AMP web page

One of the common myths about AMP is that an AMP page needs to be a stripped-down version of your site to succeed. To explore whether or not that was true, we took the time at Stone Temple Consulting to hand-code a version of one of our article pages for AMP. Here is a look at how that came out:

As you can see from the screenshots above, we created a version of the page that looked nearly identical to the original. We also added a bit of extra functionality with a toggle sidebar feature. With that, we felt we made something that had even better usability than the original page.

The result of these changes? The engagement metrics for the AMP pages on StoneTemple.com went up dramatically. For the record, here are our metrics including the handcrafted AMP pages:

As you can see, the metrics have improved dramatically. We still have more that we can do with the handcrafted page as well, and we believe we can get these metrics to be better than that of the standard mobile responsive page. At this point in time, total effort on the handcrafted page template was about 40 hours.

Note: We do believe that we can get engagement on the AMP by Automatic plugin version to go way up, too. One of the reasons we did the hand-coded version was to get hands-on experience with AMP coding. We’re working on a better custom implementation of the AMP by Automatic pages in parallel.

---

Bonus challenge: AMP analytics

Aside from the actual implementation of AMP, there is a second major issue to be concerned about if you want to be successful: the tracking. The default tracking in Google Analytics for AMP pages is broken, and you’ll need to patch it.

Just to explain what the issue is, let’s look at the following illustration:

The way AMP works (and one of the things that helps with speeding up your web pages) is that your content is served out of a cache on Google. When a user clicks on the AMP link in the search results, that page lives in Google’s cache (on Google.com). That’s the web page that gets sent to the user.

The problem occurs when a user is viewing your web page on Google’s cache, and then clicks on a link within that page (say, to the home page of your site). This action means they leave the Google.com page and get the next page delivered from your server (in the example above, I’m using the StoneTemple.com server.)

From a web analytics point of view, those are two different websites. The analytics for StoneTemple.com is going to view that person who clicked on the AMP page in the Google cache as a visitor from a third-party website, and not a visitor from search. In other words, the analytics for StoneTemple.com won’t record it as a continuation of the same session; it’ll be tracked as a new session.

You can (and should) set up analytics for your AMP pages (the ones running on Google.com), but those are normally going to run as a separate set of analytics. Nearly every action on your pages in the Google cache will result in the user leaving the Google cache, and that will be seen as leaving the site that the AMP analytics is tracking. The result is that in the analytics for your AMP pages running on Google.com:

• Your pages per session will be about one
• Bounce rate will be very high (greater than 90 percent)
• Session times will be very short

Then, for the AMP analytics on your domain, your number of visitors will not reflect any of the people who arrive on an AMP page first, and will only include those who view a second page on the site (on your main domain). If you try fixing this by adding your AMP analytics visit count to your main site analytics count, you’ll be double counting people that click through from one to the other.

There is a fix for this, and it’s referred to as “session stitching.” This is a really important fix to implement, and Google has provided it by creating an API that allows you to share the client ID information from AMP analytics with your regular website analytics. As a result, the analytics can piece together that it’s a continuation of the same session.

For more, you can see how to implement the fix to remedy both basic and advanced metrics tracking in my article on session stitching here.

---

Wrapping up

AMP can offer some really powerful benefits — improved site speed, better user experience and more revenue — but only for those publishers that take the time to implement the AMP version of their AMP site thoroughly, and also address the tracking issue in analytics so they can see the true results.

Sign up for The Moz Top 10, a semimonthly mailer updating you on the top ten hottest pieces of SEO news, tips, and rad links uncovered by the Moz team. Think of it as your exclusive digest of stuff you don't have time to hunt down but want to read!

from Moz Blog https://moz.com/blog/amp-digital-marketing-2018
via IFTTT